DS-2CD2142FWD-I
4MP WDR IR Dome Network Camera
- Up to 4 Megapixel high resolution
- Support dual stream, and sub stream for mobile surveillance
- 120dB WDR(Wide Dynamic Range)
- IK10 impact protection
- IP66 ingress protection housing
- Built-in PoE (Power over Ethernet)
| Specifications | |
| CAMERA | |
| Image Sensor | 1/3-inches Progressive Scan CMOS |
| Min. illumination | 0.01Lux @ (F1.2, AGC ON) ,0 Lux with IR 0.028Lux @ (F2.0, AGC ON) ,0 Lux with IR |
| Shutter time | 1/3 s to 1/100,000s |
| Lens | 4 mm @ F2.0 Angle of view: 85° |
| Lens mount | M12 |
| Day & night | IR cut filter with auto switch |
| Digital noise reduction | 3D DNR |
| Wide dynamic range | 128dB |
| Adjustmnet | Pan:0° - 355°, Tilt: 0° - 75° |
| COMPRESSION STANDARD | |
| Video compression | H.264 / MJPEG / H.264+ |
| H.264 Type | Main Profile |
| Bit rate | 32 Kbps €“ 16 Mbps |
| Dual Stream | Yes |
| IMAGE | |
| Max. Image Resolution | 2688 x 1520 |
| Frame rate | 50Hz: 20ftp(2688 x 1520), 25fps(1920 x 1080), 25fps (1280 x 960), 25fps (1280 x 720) |
| Image settings | Rotate mode,Saturation, brightness, contrast, sharpeness adjustable through client software or web browser |
| Backlight Compensation | Yes, zone configurable |
| ROI | Support |
| NETWORK | |
| Network storage | NAS (Support NFS,SMB/CIFS) |
| Alarm trigger | Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
| Protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| General | Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP address filtering, Anonymous access |
| System compatibility | ONVIF, PSIA, CGI, ISAPI |
| INTERFACE | |
| Communication interface | 1 RJ45 10M / 100M ethernet port |
| On-board Storage | Built-in Micro SD / SDHC / SDXC slot, up to 128GB |
| Reset Button | Yes |
| GENERAL | |
| Operating conditions | -30 °C ~ 60 °C (-22°F ~ 140 °F) humidity 95% or less (non-condensing) |
| Power supply | 12 VDC ± 10% , PoE (802.3af) |
| Power consumption | Max. 5W |
| Protect level | IP66 |
| Impact Protection | IEC60068-2-75Eh, 20J; EN50102, up to IK10 |
| IR range | 30 meters |
| Dimensions (mm) | ∅111 x 82mm |
| Weight | 500g (1.1 lbs) |
*Product design & specifications are subject to change without notice.