Search Products

F1110P-8-102W v1.0

8-Port 100Mbps Unmanaged PoE Switch

  • 8 10/100BASE-TX RJ45 ports, 2 10/100/1000BASE-T RJ45 ports
  • 6KV lightning protection
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 51V DC power to PoE Powered Device
  • Extend Ethernet mode with 250m transmission distance
  Specifications
HARDWARE FEATURES
Network standards IEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at
MTBF  50,000 hours(about 5 years)
LED indicators Link/Act, PoE Status, Power, 1000M
Fixed ports 8 x 10/100Base-TX RJ45 Ports(Data/Power)
2 x 10/100/1000Base-T RJ45 Port(Data)
Port lightning protection ≥6 kV
Forwarding mode Store-and-forward
Switching capacity 5.6 Gbit/s
MAC address table 4K MAC
PoE power supply Port 1 to Port 8 support standard IEEE802.3at/af power( maximum power for each port is 30W) 
PoE power type is end-span(1245+, 3678- line pair)
in full configuration <102W
PoE Max Power Supply 99W
Dimensions ( W x D x H ) 177.5mm*104mm*26mm
Input Voltage AC 100-240V~ 50/60Hz
DC 51V /2.1A  Power Adapter  
Environment Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
One-key Mode Default Mode: If Default mode is enabled, the device works as a general switch and all ports support 10/100Mbps auto-negotiation. VLAN Mode: 1-8 port can be isolated each other but 1-8 port can connect to 9/10 port after open VLAN to stop broadcast storm to increase forwarding rate of frame.
Extend Mode: If Extend mode is enabled, VLAN isolation is enabled. Port 1-4 will be isolated respectively (10Mbps auto-negotiation), but can communicate with the Uplink port. And the delivery distance of powering and network data is up to 250m (10Mbps).
Certification 3C, FCC, CE, RHOS
*Product design & specifications are subject to change without notice.