Search Products

W36AP

1200Mbps Wireless In-Wall Access Point

  • Multicolor decals for colorful AP panels
  • Up to 1167 Mbps dual-band concurrent wireless speed
  • 86 mm x 86 mm in-wall design, ultra-thin shell and fashionable appearance
  • Standard PoE power supply supported, making installation easier
  • Central management of IP-COM full system AC and enterprise router supported
  Specifications
HARDWARE SPECIFICATIONS
Dimensions 86*86*34.8mm
Product Appearance In-wall access point
Application Scenarios WiFi coverage for large-sized apartments/villas/hotel rooms
Working Frequency Band 2.400-2.4835 GHz, 5.15 0 -5.250 GHz
Wireless Standards IEEE 802.11a/b/g/n/ac
Max 2.4GHz wireless rate 1-300Mbps
Max 5GHz wireless rate 6-867Mbps
2.4 GHz Maximum Connections 128
5 GHz Maximum Connections 128
Ethernet Port 2 10/100/1000 Base TX ports
Reset Button 1 reset button
LED Indicators 1 x SYS LED indicator and 1 x LAN LED indicator
Power Consumption of the Whole Device Full load 7.8 W
Power Supply Mode IEEE 802.3af
2.4 GHz Antenna Gain 4 dBi
5 GHz Antenna Gain 4 dBi
2.4 GHz Output Power 20+/-1.5 dBm
5 GHz Output Power 16+/-1.5 dBm
11b 1 Mbps Received Sensitivity -95 dBm
11n MCS7 Received Sensitivity -73 dBm
11a 6 Mbps Received Sensitivity -93 dBm
11ac MCS7 Received Sensitivity -75 dBm
SOFTWARE SPECIFICATIONS
Operating modes AP, Client + AP
SSID Hide Supported
2.4 GHz SSID Number 8
5 GHz SSID Number 4
Chinese SSID Supported
WEP 64/128 bit encryption supported
WPA-PSK AES/TKIP
WPA2-PSK AES/TKIP
WPA Supported
WPA2 Supported
Wireless Access Control MAC address-based filtering supported
TX Power Adjustment Supported
SSID Isolation Supported
AP Isolation Supported
Wireless User Access Limit Supported
Weak Signal Client Access Limit Supported
WMM Supported
5 GHz Band Navigation (5 GHz Priority) Supported
Multicast to Unicast Supported
Detection Broadcast Message Reply Inhibition Supported
Access Control Supported
VLAN and SSID Binding Supported
LED Control Supported
Diagnostic Tool ping
Timed Reboot Supported
Cyclic Reboot Supported
Device Management Web management
Uplink Detection Supported
Hardware Watchdog Supported
Remote Log Management Supported
Logs System log
Firmware Upgrade Local upgrade and upgraded by AC
Reboot Local reboot and rebooted by AC
Reset Local reset and reset by AC
Backup Supported
Restore Supported
AC Management AC1000/AC2000/AC3000 supported
OPERATING ENVIRONMENT
Package Contents 1*Wireless Access Point
2*Screws
1*Quick Installation Guide
Operating temperature -10℃ - 45℃
Operating humidity (10% - 90%) RH, non-condensing
Storage temperature -30℃ - 70℃
Storage humidity (10% - 90%) RH, non-condensing
Default IP 192.168.0.254
Default Login Username admin
*Product design & specifications are subject to change without notice.